|  
LOOKING FOR A CAN AM SPYDER? WE HAVE THEM IN STOCK NOW!!!!! CHECK OUT THE FALL ATV SPECIALS!!!!! SIDE BY SIDES ON SALE NOW. YAMAHA AND KAWASAKI'S!!!!! BEST SELECTION OF PRE OWNED MOTORCYCLES IN THE AREA!!!! 2009 MOTORCYCLES ARE STARTING TO ARRIVE....ORDERS YOURS TODAY!!!!! 
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Crane cam dyno-proven cams for Twin Cam 88 applications
- Hydraulic cams are computer-designed so cam profile accurately delivers consistent performance
- Cams use splined cam sprockets standard on 00-06 models (except 06 Dyna); 99 models will need to replace the stock cam keyed-style sprocket with the splined 00-06 cam sprocket (OEM #25446-99)
- All cams for 06 Dyna and all 07-08 models require the use of 99-04 style valves, seals, valve guides and spring kits
- For 99-08 Twin Cam models
290-2 HOT STREET PERFORMANCE- Great mid-range and upper end power
- Works great with stock up to 95 cubic inch kits
- Provides optimum power with 9.5 compression ratio and modified heads
- Must use Crane valve springs, set up for .570” lift, performance air cleaner and exhaust
- Power range from 1800 to 5800 rpm
296-2 HOT STREET- For heavily modified engines with a compression ratio of 10.25:1 and up, big bore kit and headwork
- Performance air cleaner and performance exhaust also required
- Designed for use with Edelbrock Performer RPM Twin Cam cylinder heads
- .620” lift, range: 2000 to 6000 rpm
300-2 MILD STREET, CRUISING/TOURING- Bolt-in camshaft; great low-end and mid-range power
- Works well in heavier bikes with performance air cleaner, exhaust and stock compression ratio
- Can be used with stock valve springs
- Power range from idle to 5000 rpm
304-2 MAX HOT STREET- Strong mid-range torque with great upper end power
- Best for modified engines with 10.5 compression ratio, big bore kits and modified heads
- Must use Crane valve springs, set up for .700” travel, performance air cleaner and exhaust
- Power range from 2000 to 6200 rpm
310-2 MODERATE STREET, CRUISING- Bolt-in camshaft; good low end and mid-range power
- Great for Dynas, Softails and solo riders
- Works best with performance air cleaner, exhaust and compression ratio from stock to 9.5:1
- Can be used with stock valve springs
- Power range from 1500 to 5000 rpm
316-2 STREET PERFORMANCE- Bolt-in camshaft; 10.1 compression ratio recommended
- Works best with performance air cleaner and exhaust
- Can use stock valve springs
- Power range from 1800 to 5800 rpm
NOTE: Must check coil bind, valve to valve clearance and valve to piston clearance.
|
|
|
|
|
|
|
|
|  
Click HERE or above to sign our Guestbook for a chance to win a $50 Gift Certificate!
HONDA GENERATORS ON SALE NOW!!!!! HONDA SNOW BLOWERS IN STOCK....BUY ONE NOW BEFORE THEY'RE GONE!!
| |
|
|
